In Windows 8 (eight), the configuration is similar, but in order to open the Control Panel, you need to click RMB on the Start menu and select All Applications, where there will be a necessary link. Switch the dialog boxes to the states shown in the following figure. Windows 7 Through the Start, activate the Control Panel and click on View network status and tasks. Zte Zxdsl 931Wii Firmware Latest Version Windows 7 Through The To do this, use the LAN1 port on the Wi-Fi modem, and on the PC the network card connector.Ĭomputer settings In cases when the computer is connected, and the corresponding LAN indicator on the front panel of the WiFi router does not light up, you should configure the PC network card. To configure the zte zxhn h108n or zxv10 h108l parameters, connect your computer to it using the Ethernet cable (included). In the Phone port, connect the telephone, if available, and conclude an agreement with Ukrtelecom to provide this type of communication. To connect a WiFi router to a Ukrtelecom network using ADSL technology, perform the following operations: Connect the power supply to the Wi-Fi modem through the Power connector, then plug it into the electrical network.Ĭonnect the zxhn h108n or zxv10 h108l to the Modem port, on which the required jack is labeled DSL. It is worth noting that the algorithm for connecting a WiFi router to other telecom operators is not very different, so the instruction will be useful for users of other networks. It can provide access to the global network for four subscribers through a wired interface, and the device is also equipped with a WiFi module to create wireless connections. The modem supports an Internet connection using ADSL technology. The Ukrtelecom provider, which recommends purchasing this device to connect to its network and renting it out, is no exception.
Thats it, the device is configured and you can use it to connect via WiFi. In the login field you need to write the number of your contract, and the password should be given to you in Beltelecom (byfly). In the list that appears, click on WAN, and then on WAN Connection. If the address or a bunch of login-password do not fit, look at the bottom of the router - there is a sticker with all the data. Next, you will be asked to enter a username and password, usually it is admin admin.
0 kommentar(er)
